
California: A Pollution Disaster in Marin County
Pulse Modulated Radiofrequency Microwave Radiation (RF/MWR)
January 26, 2022 | GQ-EMF-390 METER reading | https://wireamerica.org/rfmeters/ | scientists4wiredtech.com
Let’s unpack this from https://wireamerica.org/rfmeters/
Average of 5,ooo µW/m² could be a peak reading of 50,000 to 500,000 µW/m².
How does that translate? According to https://www.powerwatch.org.uk/science/unitconversion.asp
PFD = Power Flux Density, reported as µW/m²
PFD = (V/m)2/377 watts per square meter (W/m2)
(65)2/377 = 11.2 million µW/m², exceeding the FCC guideline for frequencies 1500 MHz and above by about 12%.
Using (f/1500)*10 million,
- If you are metering primarily 600 MHz, then the FCC limit is 4,000,000 µW/m² and your reading is exceeding that by 180%
- If you are metering primarily 900 MHz, then the FCC limit is 6,000,000 µW/m² and your reading is exceeding that by 87%
- If you are metering primarily 1,200 MHz, then the FCC limit is 8,000,000 µW/m² and your reading is exceeding that by 40%
Next steps
- Get a better broadband meter, with current certificate of calibration
- Bring a spectrum analyzer to determine which frequencies are contributing to this total
- Meter at three different times of day: 10:00 am, 2:00 pm and 6:00 pm — log peak and average readings for 30 minutes each time.
- Report this Wireless Telecommunications Facilities (WTF) to the FCC with the supporting data
For the magnetic reading,
Read this from 2016: https://responsibleipad.com/truth.html
Per https://www.baubiologie.de/downloads/building-biology-guidelines-english.pdf
3.8 milliGauss is in Severe Hazard territory
More Information: https://wireamerica.org/rfmeters/
This is the meter mentioned in the New Hamsphire report
Information on the GQ-EMF-390 here
More information here
Thank you to CS and PG for RF/MWR reading and analysis
Link To Learn How To Begin Reducing Your RF/MWR Exposure Today
Authors:PubMed |
Scientific Study: Evidence for a connection between coronavirus disease-19 and exposure to radiofrequency radiation from wireless communications including 5G
“Coronavirus disease (COVID-19) public health policy has focused on the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus and its effects on human health while environmental factors have been largely ignored. In considering the epidemiological triad (agent-host-environment) applicable to all disease, we investigated a possible environmental factor in the COVID-19 pandemic: ambient radiofrequency radiation from wireless communication systems including microwaves and millimeter waves.”